# Traditional Chinese Translation for the nano editor.
# Copyright (C) 2004, 05, 13, 18, 19, 21 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
#
# Wei-Lun Chao <bluebat@member.fsf.org>, 2004, 2005, 2013.
# Yi-Jyun Pan <pan93412@gmail.com>, 2018, 2019, 2020, 2021.
msgid ""
msgstr ""
"Project-Id-Version: GNU nano 7.0-pre1\n"
"Report-Msgid-Bugs-To: nano-devel@gnu.org\n"
"POT-Creation-Date: 2022-11-07 11:53+0100\n"
"PO-Revision-Date: 2022-11-07 19:27+0800\n"
"Last-Translator: Yi-Jyun Pan <pan93412@gmail.com>\n"
"Language-Team: Chinese (traditional) <zh-l10n@lists.linux.org.tw>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Poedit 3.2\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"

#. TRANSLATORS: Try to keep this at most 7 characters.
#: src/browser.c:186 src/browser.c:193
msgid "(dir)"
msgstr "(目錄)"

#. TRANSLATORS: Try to keep this at most 12 characters.
#: src/browser.c:190
msgid "(parent dir)"
msgstr "(上層目錄)"

#. TRANSLATORS: Try to keep this at most 7 characters.
#. * If necessary, you can leave out the parentheses.
#: src/browser.c:220
msgid "(huge)"
msgstr "(huge)"

#: src/browser.c:269 src/browser.c:274 src/search.c:258
msgid "Search Wrapped"
msgstr "已從頭開始搜尋"

#: src/browser.c:281 src/search.c:434
msgid "This is the only occurrence"
msgstr "這是唯一出現之處"

#. TRANSLATORS: This is the main search prompt.
#: src/browser.c:314 src/search.c:100
msgid "Search"
msgstr "搜尋"

#. TRANSLATORS: A modifier of the Search prompt.
#: src/browser.c:316 src/search.c:104
msgid " [Backwards]"
msgstr " [往後搜尋]"

#: src/browser.c:322 src/browser.c:564 src/files.c:1154 src/files.c:1241
#: src/files.c:2169 src/nano.c:321 src/search.c:114 src/search.c:293
#: src/search.c:720 src/search.c:776 src/text.c:2603 src/text.c:2794
msgid "Cancelled"
msgstr "已取消"

#: src/browser.c:349 src/search.c:369
msgid "No current search pattern"
msgstr "無符合搜尋樣式之結果"

#: src/browser.c:404
#, c-format
msgid "Cannot open directory: %s"
msgstr "無法開啟目錄：%s"

#. TRANSLATORS: This is a prompt.
#: src/browser.c:563
msgid "Go To Directory"
msgstr "前往目錄"

#. TRANSLATORS: This refers to the confining effect of
#. * the option --operatingdir, not of --restricted.
#: src/browser.c:581 src/browser.c:612
#, c-format
msgid "Can't go outside of %s"
msgstr "不可超出 %s 範圍"

#: src/browser.c:603
msgid "Can't move up a directory"
msgstr "無法上移一個目錄"

#: src/browser.c:618 src/files.c:917 src/files.c:923 src/files.c:1813
#: src/files.c:1828 src/history.c:263 src/history.c:291 src/history.c:359
#: src/history.c:419 src/rcfile.c:917 src/rcfile.c:1690
#, c-format
msgid "Error reading %s: %s"
msgstr "讀取 %s 時發生錯誤：%s"

#: src/browser.c:688 src/files.c:363
msgid "The working directory has disappeared"
msgstr "目前的工作目錄已經消失"

#: src/color.c:156
#, c-format
msgid "Unknown syntax name: %s"
msgstr "語法名稱未知：%s"

#: src/color.c:196
#, c-format
msgid "magic_load() failed: %s"
msgstr "magic_load() 錯誤：%s"

#: src/color.c:200
#, c-format
msgid "magic_file(%s) failed: %s"
msgstr "magic_file(%s) 錯誤：%s"

#: src/cut.c:169 src/cut.c:234 src/cut.c:568
msgid "Nothing was cut"
msgstr "未剪下任何內容"

#: src/cut.c:618 src/cut.c:664
msgid "Copied nothing"
msgstr "什麼都沒複製"

#: src/cut.c:728
msgid "Cutbuffer is empty"
msgstr "剪下緩衝區為空"

#: src/files.c:133
#, c-format
msgid "Error deleting lock file %s: %s"
msgstr "刪除鎖定檔 %s 時發生錯誤：%s"

#. TRANSLATORS: Keep the next seven messages at most 76 characters.
#: src/files.c:162
msgid "Couldn't determine my identity for lock file"
msgstr "無法確定用於鎖定檔的個人身份"

#: src/files.c:167
#, c-format
msgid "Couldn't determine hostname: %s"
msgstr "無法確定主機名稱：%s"

#: src/files.c:183 src/files.c:226
#, c-format
msgid "Error writing lock file %s: %s"
msgstr "寫入鎖定檔 %s 時發生錯誤：%s"

#: src/files.c:254
msgid "Someone else is also editing this file"
msgstr "其他人也在編輯此檔案"

#: src/files.c:263
#, c-format
msgid "Error opening lock file %s: %s"
msgstr "開啟鎖定檔 %s 時發生錯誤：%s"

#: src/files.c:278
#, c-format
msgid "Bad lock file is ignored: %s"
msgstr "忽略無效鎖定檔案：%s"

#. TRANSLATORS: The second %s is the name of the user, the third that of the editor.
#: src/files.c:299
#, c-format
msgid "File %s is being edited by %s (with %s, PID %s); open anyway?"
msgstr "檔案 %s 正被 %s 編輯（使用 %s、PID %s）；仍然開啟？"

#. TRANSLATORS: Keep the next ten messages at most 76 characters.
#: src/files.c:367
#, c-format
msgid "Directory '%s' does not exist"
msgstr "目錄「%s」不存在"

#: src/files.c:369
#, c-format
msgid "Path '%s': %s"
msgstr "位置「%s」：%s"

#: src/files.c:371
#, c-format
msgid "Path '%s' is not a directory"
msgstr "「%s」不是一個目錄"

#: src/files.c:373
#, c-format
msgid "Path '%s' is not accessible"
msgstr "位置「%s」無法存取"

#: src/files.c:376
#, c-format
msgid "Directory '%s' is not writable"
msgstr "目錄「%s」唯讀"

#: src/files.c:403
#, c-format
msgid "Can't read file from outside of %s"
msgstr "無法讀取 %s 外的檔案"

#: src/files.c:413 src/rcfile.c:893
#, c-format
msgid "\"%s\" is a directory"
msgstr "「%s」為目錄"

#: src/files.c:418 src/rcfile.c:894
#, c-format
msgid "\"%s\" is a device file"
msgstr "「%s」為裝置檔案"

#: src/files.c:424
#, c-format
msgid "\"%s\" is a FIFO"
msgstr "「%s」是個 FIFO"

#: src/files.c:431
#, c-format
msgid "%s is meant to be read-only"
msgstr "%s 意指唯讀"

#. TRANSLATORS: First %s is file name, second %s is file format.
#: src/files.c:542
#, c-format
msgid "%s -- %zu line (%s)"
msgid_plural "%s -- %zu lines (%s)"
msgstr[0] "%s -- 第 %zu 列 (%s)"

#: src/files.c:544 src/files.c:550 src/global.c:1052 src/winio.c:2042
msgid "New Buffer"
msgstr "新緩衝區"

#: src/files.c:545
msgid "DOS"
msgstr "DOS"

#: src/files.c:545
msgid "Mac"
msgstr "Mac"

#: src/files.c:548
#, c-format
msgid "%s -- %zu line"
msgid_plural "%s -- %zu lines"
msgstr[0] "%s -- 第 %zu 列"

#: src/files.c:558
msgid "No more open file buffers"
msgstr "無其他已開啟檔案的緩衝區"

#: src/files.c:785 src/files.c:915 src/files.c:1867
msgid "Interrupted"
msgstr "已中止"

#: src/files.c:831
#, c-format
msgid "File '%s' is unwritable"
msgstr "檔案「%s」唯讀"

#. TRANSLATORS: Keep the next three messages at most 78 characters.
#: src/files.c:835
#, c-format
msgid "Read %zu line (converted from Mac format)"
msgid_plural "Read %zu lines (converted from Mac format)"
msgstr[0] "已讀取 %zu 列（轉檔自 Mac 格式）"

#: src/files.c:839
#, c-format
msgid "Read %zu line (converted from DOS format)"
msgid_plural "Read %zu lines (converted from DOS format)"
msgstr[0] "已讀取 %zu 列（轉檔自 DOS 格式）"

#: src/files.c:844
#, c-format
msgid "Read %zu line"
msgid_plural "Read %zu lines"
msgstr[0] "已讀取 %zu 列"

#: src/files.c:889
msgid "New File"
msgstr "新檔案"

#: src/files.c:892
#, c-format
msgid "File \"%s\" not found"
msgstr "未找到檔案「%s」"

#: src/files.c:899
msgid "Reading from FIFO..."
msgstr "正在從 FIFO 讀取…"

#: src/files.c:927
msgid "Reading..."
msgstr "讀取中…"

#: src/files.c:1029 src/text.c:2346 src/text.c:2611
#, c-format
msgid "Could not create pipe: %s"
msgstr "無法建立管線：%s"

#: src/files.c:1069 src/files.c:1113 src/text.c:2160 src/text.c:2426
#: src/text.c:2646
#, c-format
msgid "Could not fork: %s"
msgstr "無法 fork：%s"

#: src/files.c:1074
msgid "Executing..."
msgstr "執行中…"

#. TRANSLATORS: This one goes with Undid/Redid messages.
#: src/files.c:1094 src/files.c:1144
msgid "filtering"
msgstr "正在篩選"

#: src/files.c:1137
#, c-format
msgid "Failed to open pipe: %s"
msgstr "無法開啟管線：%s"

#: src/files.c:1155
#, c-format
msgid "Error: %s"
msgstr "錯誤：%s"

#: src/files.c:1160
msgid "Piping failed"
msgstr "傳入管線失敗"

#. TRANSLATORS: The next six messages are prompts.
#: src/files.c:1203
msgid "Command to execute in new buffer"
msgstr "要在新緩衝區執行的指令"

#: src/files.c:1206
msgid "Command to execute"
msgstr "要執行的指令"

#: src/files.c:1214
#, c-format
msgid "File to read unconverted into new buffer [from %s]"
msgstr "要讀取的檔案未轉換至新的緩衝區 [來自 %s]"

#: src/files.c:1217
#, c-format
msgid "File to read into new buffer [from %s]"
msgstr "將檔案讀入新的緩衝區 [來自 %s]"

#: src/files.c:1222
#, c-format
msgid "File to insert unconverted [from %s]"
msgstr "要不轉換插入的檔案 [來自 %s]"

#: src/files.c:1225
#, c-format
msgid "File to insert [from %s]"
msgstr "要插入的檔案 [從 %s]"

#: src/files.c:1495
#, c-format
msgid "Invalid operating directory: %s\n"
msgstr "操作目錄無效：%s\n"

#: src/files.c:1544
#, c-format
msgid "Invalid backup directory: %s\n"
msgstr "備份目錄無效：%s\n"

#: src/files.c:1599
msgid "Making backup..."
msgstr "正在建立備份…"

#: src/files.c:1631
msgid "Too many existing backup files"
msgstr "現存備份檔案過多"

#: src/files.c:1679
msgid "Cannot read original file"
msgstr "無法讀取原始檔案"

#: src/files.c:1711
msgid "Cannot make regular backup"
msgstr "無法建立規律備份"

#: src/files.c:1712
msgid "Trying again in your home directory"
msgstr "請在家目錄重試一次"

#: src/files.c:1724
msgid "Cannot make backup"
msgstr "無法建立備份"

#. TRANSLATORS: Try to keep this message at most 76 characters.
#: src/files.c:1735
msgid "Cannot make backup; continue and save actual file? "
msgstr "無法建立備份；繼續並儲存實體檔案？"

#. TRANSLATORS: The %s is the reason of failure.
#: src/files.c:1740
#, c-format
msgid "Cannot make backup: %s"
msgstr "無法建立備份：%s"

#: src/files.c:1774
#, c-format
msgid "Can't write outside of %s"
msgstr "無法寫入 %s 外部"

#: src/files.c:1806 src/files.c:1869 src/files.c:1880 src/files.c:1901
#: src/files.c:1918 src/files.c:1927 src/files.c:1955 src/files.c:1966
#: src/files.c:1973 src/history.c:333 src/history.c:344 src/history.c:347
#: src/history.c:435 src/history.c:459 src/history.c:465
#, c-format
msgid "Error writing %s: %s"
msgstr "寫入 %s 時發生錯誤: %s"

#: src/files.c:1820 src/files.c:1832 src/text.c:2535 src/text.c:2547
#: src/text.c:2945
#, c-format
msgid "Error writing temp file: %s"
msgstr "寫入暫存檔時發生錯誤：%s"

#: src/files.c:1839
msgid "Writing to FIFO..."
msgstr "正在寫入 FIFO…"

#: src/files.c:1887
msgid "Writing..."
msgstr "寫入中…"

#: src/files.c:1943 src/files.c:1951
#, c-format
msgid "Error reading temp file: %s"
msgstr "讀取暫存檔時發生錯誤：%s"

#. TRANSLATORS: This warns for data loss when the disk is full.
#: src/files.c:1980
msgid "File on disk has been truncated!"
msgstr "磁碟上的檔案遭截斷！"

#. TRANSLATORS: This is a suggestion to the user,
#. * where "resume" means resuming from suspension.
#. * Try to keep this at most 76 characters.
#: src/files.c:1985
msgid "Maybe ^T^Z, make room on disk, resume, then ^S^X"
msgstr "試試 ^T^Z，清出磁碟空間，繼續，然後 ^S^X"

#: src/files.c:2047
#, c-format
msgid "Wrote %zu line"
msgid_plural "Wrote %zu lines"
msgstr[0] "已寫入 %zu 列"

#: src/files.c:2132
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:2133
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:2134
msgid " [Backup]"
msgstr " [備份]"

#. TRANSLATORS: The next six strings are prompts.
#: src/files.c:2141
msgid "Prepend Selection to File"
msgstr "將選取區域複製到檔案開頭"

#: src/files.c:2142
msgid "Append Selection to File"
msgstr "將選取區域複製至檔案結尾"

#: src/files.c:2143
msgid "Write Selection to File"
msgstr "將選取區域寫入檔案"

#: src/files.c:2145
msgid "File Name to Prepend to"
msgstr "要前置內容的檔案名稱"

#: src/files.c:2146
msgid "File Name to Append to"
msgstr "要附加內容的檔案名稱"

#: src/files.c:2149
msgid "File Name to Write"
msgstr "要寫入的檔案名稱"

#. TRANSLATORS: Concisely say the screen is too small.
#: src/files.c:2229 src/nano.c:1081
msgid "Too tiny"
msgstr "螢幕過小"

#. TRANSLATORS: Restricted mode forbids overwriting.
#: src/files.c:2262
msgid "File exists -- cannot overwrite"
msgstr "檔案已存在 -- 無法覆蓋"

#: src/files.c:2271
msgid "Save file under DIFFERENT NAME? "
msgstr "以不同名稱存檔？"

#: src/files.c:2279
#, c-format
msgid "File \"%s\" exists; OVERWRITE? "
msgstr "檔案「%s」已存在；是否覆寫？"

#: src/files.c:2303
msgid "File on disk has changed"
msgstr "磁碟上的檔案已變更"

#. TRANSLATORS: Try to keep this at most 76 characters.
#: src/files.c:2306
msgid "File was modified since you opened it; continue saving? "
msgstr "檔案在您開啟後被修改過；是否繼續儲存？ "

#: src/files.c:2685
msgid "(more)"
msgstr "(更多)"

#. TRANSLATORS: Try to keep the next two strings at most 10 characters.
#: src/global.c:537
msgid "Exit"
msgstr "退出"

#: src/global.c:538
msgid "Close"
msgstr "關閉"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:546
msgid "Cancel the current function"
msgstr "取消目前功能"

#: src/global.c:547
msgid "Display this help text"
msgstr "顯示此說明內容"

#: src/global.c:548
msgid "Close the current buffer / Exit from nano"
msgstr "關閉目前緩衝區 / 退出 nano"

#: src/global.c:550
msgid "Write the current buffer (or the marked region) to disk"
msgstr "將目前緩衝區（或已標記區域）寫入磁碟"

#: src/global.c:552
msgid "Insert another file into current buffer (or into new buffer)"
msgstr "將其他檔案插入目前緩衝區（或插入新緩衝區）"

#: src/global.c:554
msgid "Search forward for a string or a regular expression"
msgstr "使用字串或正規表示式來向前搜尋"

#: src/global.c:556
msgid "Search backward for a string or a regular expression"
msgstr "使用字串或正規表示式來向後搜尋"

#: src/global.c:558
msgid "Cut current line (or marked region) and store it in cutbuffer"
msgstr "剪下目前行（或選取區域）並在剪貼簿儲存該列"

#: src/global.c:560
msgid "Paste the contents of cutbuffer at current cursor position"
msgstr "在目前游標位置貼上剪貼簿的內容"

#: src/global.c:561
msgid "Display the position of the cursor"
msgstr "顯示游標位置"

#: src/global.c:563
msgid "Invoke the spell checker, if available"
msgstr "嘗試呼叫拼字檢查"

#: src/global.c:565
msgid "Replace a string or a regular expression"
msgstr "取代字串或正規表示式"

#: src/global.c:566
msgid "Go to line and column number"
msgstr "前往指定列與行碼"

#: src/global.c:568
msgid "Mark text starting from the cursor position"
msgstr "從游標位置開始標記文字"

#: src/global.c:570
msgid "Copy current line (or marked region) and store it in cutbuffer"
msgstr "複製目前列（或選取區域）並在剪貼簿儲存該列"

#: src/global.c:571
msgid "Throw away the current line (or marked region)"
msgstr "刪除目前列（或選取區域）"

#: src/global.c:572
msgid "Indent the current line (or marked lines)"
msgstr "縮排目前列（或選取區域）"

#: src/global.c:573
msgid "Unindent the current line (or marked lines)"
msgstr "移除目前列（或選取區域）的縮排"

#: src/global.c:574
msgid "Undo the last operation"
msgstr "復原上個動作"

#: src/global.c:575
msgid "Redo the last undone operation"
msgstr "重作上一筆被復原的動作"

#: src/global.c:577
msgid "Go back one character"
msgstr "往回跳一字元"

#: src/global.c:578
msgid "Go forward one character"
msgstr "往前跳一字元"

#: src/global.c:579
msgid "Go back one word"
msgstr "往回跳一單詞"

#: src/global.c:580
msgid "Go forward one word"
msgstr "往前跳一單詞"

#: src/global.c:581
msgid "Go to previous line"
msgstr "前往上一列"

#: src/global.c:582
msgid "Go to next line"
msgstr "前往下一列"

#: src/global.c:583
msgid "Go to beginning of current line"
msgstr "前往目前列首"

#: src/global.c:584
msgid "Go to end of current line"
msgstr "前往目前列尾"

#: src/global.c:585
msgid "Go to previous block of text"
msgstr "前往前一塊文字"

#: src/global.c:586
msgid "Go to next block of text"
msgstr "前往後一塊文字"

#: src/global.c:589
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "前往目前段落開頭；而後再跳前一段落的開頭"

#: src/global.c:591
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "前往目前段落結尾；而後再跳後一段落的結尾"

#: src/global.c:593
msgid "Go one screenful up"
msgstr "向上捲動一個畫面"

#: src/global.c:594
msgid "Go one screenful down"
msgstr "向下捲動一個畫面"

#: src/global.c:595
msgid "Go to the first line of the file"
msgstr "前往檔案第一列"

#: src/global.c:596
msgid "Go to the last line of the file"
msgstr "前往檔案最後一列"

#: src/global.c:598
msgid "Go to the matching bracket"
msgstr "前往對應的括號"

#: src/global.c:602
msgid "Scroll up one line without moving the cursor textually"
msgstr "向上捲動一列而不捲動文字上的游標"

#: src/global.c:604
msgid "Scroll down one line without moving the cursor textually"
msgstr "向下捲動一列而不捲動文字上的游標"

#: src/global.c:605
msgid "Center the line where the cursor is"
msgstr "置中游標所處列"

#: src/global.c:608
msgid "Switch to the previous file buffer"
msgstr "切換至上個檔案緩衝區"

#: src/global.c:609
msgid "Switch to the next file buffer"
msgstr "切換至下個檔案緩衝區"

#: src/global.c:611
msgid "Insert the next keystroke verbatim"
msgstr "插入下個按鍵的原形"

#: src/global.c:612
msgid "Insert a tab at the cursor position (or indent marked lines)"
msgstr "在游標位置插入定位 (Tab) 字元（或者是縮排標記列）"

#: src/global.c:613
msgid "Insert a newline at the cursor position"
msgstr "在游標位置插入換列符號"

#: src/global.c:614
msgid "Delete the character under the cursor"
msgstr "刪除游標之下的字元"

#: src/global.c:616
msgid "Delete the character to the left of the cursor"
msgstr "刪除游標左側的字元"

#: src/global.c:619
msgid "Delete backward from cursor to word start"
msgstr "刪除游標之前到單字開頭的內容"

#: src/global.c:621
msgid "Delete forward from cursor to next word start"
msgstr "刪除游標之後到下個單字開頭的內容"

#: src/global.c:623
msgid "Cut from the cursor position to the end of the file"
msgstr "剪下游標位置至檔案結尾的內容"

#: src/global.c:626
msgid "Justify the current paragraph"
msgstr "對齊目前段落"

#: src/global.c:627
msgid "Justify the entire file"
msgstr "對齊整個檔案"

#: src/global.c:631
msgid "Count the number of lines, words, and characters"
msgstr "計算列數、單字數與字元數"

#: src/global.c:632
msgid "Suspend the editor (return to the shell)"
msgstr "暫停編輯器（回到 shell）"

#: src/global.c:634
msgid "Refresh (redraw) the current screen"
msgstr "重新繪製目前畫面"

#: src/global.c:636
msgid "Try and complete the current word"
msgstr "嘗試完成目前單字"

#: src/global.c:640
msgid "Comment/uncomment the current line (or marked lines)"
msgstr "註解或取消註解目前列（或標記列）"

#: src/global.c:642
msgid "Save file without prompting"
msgstr "儲存檔案而不經確認"

#: src/global.c:643
msgid "Search next occurrence backward"
msgstr "往回搜尋下一個結果"

#: src/global.c:644
msgid "Search next occurrence forward"
msgstr "向前搜尋下一個結果"

#: src/global.c:646
msgid "Start/stop recording a macro"
msgstr "開始 / 停止錄製巨集"

#: src/global.c:647
msgid "Run the last recorded macro"
msgstr "執行上次錄製的巨集"

#: src/global.c:648
msgid "Place or remove an anchor at the current line"
msgstr "在目前的列放置或移除錨點。"

#: src/global.c:649
msgid "Jump backward to the nearest anchor"
msgstr "往回跳至最近錨點"

#: src/global.c:650
msgid "Jump forward to the nearest anchor"
msgstr "往前跳至最近錨點"

#: src/global.c:652
msgid "Toggle the case sensitivity of the search"
msgstr "切換搜尋是否要符合大小寫"

#: src/global.c:653
msgid "Reverse the direction of the search"
msgstr "反轉搜尋方向"

#: src/global.c:654
msgid "Toggle the use of regular expressions"
msgstr "切換是否使用正規表示式"

#: src/global.c:656
msgid "Recall the previous search/replace string"
msgstr "重用上次搜尋 / 取代字串"

#: src/global.c:657
msgid "Recall the next search/replace string"
msgstr "重用下次搜尋 / 取代字串"

#: src/global.c:660
msgid "Toggle the use of DOS format"
msgstr "切換是否使用 DOS 格式"

#: src/global.c:661
msgid "Toggle the use of Mac format"
msgstr "切換是否使用 Mac 格式"

#: src/global.c:662
msgid "Toggle appending"
msgstr "切換是否附加"

#: src/global.c:663
msgid "Toggle prepending"
msgstr "切換是否前置"

#: src/global.c:664
msgid "Toggle backing up of the original file"
msgstr "切換是否備份既有檔案"

#: src/global.c:665
msgid "Execute a function or an external command"
msgstr "執行函式或外部命令"

#: src/global.c:667
msgid "Pipe the current buffer (or marked region) to the command"
msgstr "將目前緩衝區（或已標記區域）透過管線傳入指令"

#: src/global.c:668
msgid "Do not convert from DOS/Mac format"
msgstr "不從 DOS/Mac 格式轉檔"

#: src/global.c:671
msgid "Toggle the use of a new buffer"
msgstr "切換是否使用新緩衝區"

#: src/global.c:673
msgid "Close buffer without saving it"
msgstr "關閉緩衝區而不儲存"

#: src/global.c:675
msgid "Go to file browser"
msgstr "開啟檔案瀏覽器"

#: src/global.c:676
msgid "Exit from the file browser"
msgstr "退出檔案瀏覽器"

#: src/global.c:677
msgid "Go to the first file in the list"
msgstr "前往列表中第一個檔案"

#: src/global.c:678
msgid "Go to the last file in the list"
msgstr "前往列表中最後一個檔案"

#: src/global.c:679
msgid "Go to the previous file in the list"
msgstr "前往列表中上一個檔案"

#: src/global.c:680
msgid "Go to the next file in the list"
msgstr "前往列表中下一個檔案"

#: src/global.c:682
msgid "Go to lefthand column"
msgstr "前往左欄"

#: src/global.c:683
msgid "Go to righthand column"
msgstr "前往右欄"

#: src/global.c:684
msgid "Go to first row in this column"
msgstr "前往此欄第一列"

#: src/global.c:685
msgid "Go to last row in this column"
msgstr "前往此欄最後一列"

#: src/global.c:687
msgid "Search forward for a string"
msgstr "向前搜尋一個字串"

#: src/global.c:688
msgid "Search backward for a string"
msgstr "向後搜尋一個字串"

#: src/global.c:689
msgid "Refresh the file list"
msgstr "重新整理檔案列表"

#: src/global.c:690
msgid "Go to directory"
msgstr "前往目錄"

#: src/global.c:693
msgid "Invoke the linter, if available"
msgstr "嘗試呼叫 linter。"

#: src/global.c:694
msgid "Go to previous linter msg"
msgstr "前往上一個 linter 訊息"

#: src/global.c:695
msgid "Go to next linter msg"
msgstr "前往下一個 linter 訊息"

#: src/global.c:699
msgid "Invoke a program to format/arrange/manipulate the buffer"
msgstr "呼叫應用程式來格式化、排列及操縱緩衝區"

#. TRANSLATORS: Try to keep the next thirteen strings at most 10 characters.
#: src/global.c:713
msgid "Help"
msgstr "說明"

#: src/global.c:717 src/prompt.c:679
msgid "Cancel"
msgstr "取消"

#: src/global.c:739
msgid "Write Out"
msgstr "儲存"

#: src/global.c:747
msgid "Read File"
msgstr "讀取"

#: src/global.c:751 src/global.c:790
msgid "Justify"
msgstr "對齊"

#: src/global.c:757 src/global.c:843 src/global.c:1038
msgid "Refresh"
msgstr "重整"

#: src/global.c:762 src/global.c:846
msgid "Where Is"
msgstr "搜尋"

#: src/global.c:765 src/global.c:826
msgid "Replace"
msgstr "取代"

#. TRANSLATORS: This starts a backward search.
#: src/global.c:769 src/global.c:848 src/global.c:867 src/global.c:1031
msgid "Where Was"
msgstr "搜尋"

#. TRANSLATORS: This refers to searching the preceding occurrence.
#: src/global.c:772 src/global.c:851 src/global.c:871
msgid "Previous"
msgstr "上個"

#: src/global.c:774 src/global.c:853 src/global.c:873
msgid "Next"
msgstr "下個"

#: src/global.c:778
msgid "Cut"
msgstr "剪下"

#: src/global.c:781
msgid "Paste"
msgstr "貼上"

#: src/global.c:786
msgid "Execute"
msgstr "執行"

#. TRANSLATORS: This refers to the position of the cursor.
#: src/global.c:796
msgid "Location"
msgstr "位置"

#: src/global.c:802 src/global.c:944 src/global.c:1077
msgid "Go To Line"
msgstr "跳列"

#. TRANSLATORS: Try to keep the next ten strings at most 12 characters.
#: src/global.c:808
msgid "Undo"
msgstr "復原"

#: src/global.c:810
msgid "Redo"
msgstr "重做"

#: src/global.c:813
msgid "Set Mark"
msgstr "設定標記"

#: src/global.c:815
msgid "Copy"
msgstr "複製"

#: src/global.c:819
msgid "Case Sens"
msgstr "區分大小寫"

#: src/global.c:821
msgid "Reg.exp."
msgstr "正規表示式"

#: src/global.c:823
msgid "Backwards"
msgstr "往回搜尋"

#: src/global.c:828
msgid "No Replace"
msgstr "不取代"

#: src/global.c:832
msgid "Older"
msgstr "較舊"

#: src/global.c:834
msgid "Newer"
msgstr "較新"

#. TRANSLATORS: Try to keep the next four strings at most 10 characters.
#: src/global.c:840
msgid "Go To Dir"
msgstr "前往目錄"

#: src/global.c:863
msgid "To Bracket"
msgstr "至 Bracket"

#. TRANSLATORS: This means move the cursor one character back.
#: src/global.c:878 src/global.c:883
msgid "Back"
msgstr "往回"

#: src/global.c:880 src/global.c:885
msgid "Forward"
msgstr "向前"

#. TRANSLATORS: Try to keep the next ten strings at most 12 characters.
#: src/global.c:891
msgid "Prev Word"
msgstr "前一個字"

#: src/global.c:893
msgid "Next Word"
msgstr "後一個字"

#: src/global.c:897
msgid "Home"
msgstr "頂端"

#: src/global.c:899
msgid "End"
msgstr "尾端"

#: src/global.c:902
msgid "Prev Line"
msgstr "上列"

#: src/global.c:904
msgid "Next Line"
msgstr "下列"

#: src/global.c:907
msgid "Scroll Up"
msgstr "向上捲動"

#: src/global.c:909
msgid "Scroll Down"
msgstr "向下捲動"

#: src/global.c:913
msgid "Prev Block"
msgstr "前一個區塊"

#: src/global.c:915
msgid "Next Block"
msgstr "後一個區塊"

#. TRANSLATORS: Try to keep these two strings at most 16 characters.
#: src/global.c:919
msgid "Begin of Paragr."
msgstr "段落開頭"

#: src/global.c:921
msgid "End of Paragraph"
msgstr "段落結尾"

#. TRANSLATORS: Try to keep the next six strings at most 12 characters.
#: src/global.c:926 src/global.c:1126
msgid "Prev Page"
msgstr "上頁"

#: src/global.c:928 src/global.c:1128
msgid "Next Page"
msgstr "下頁"

#: src/global.c:931
msgid "First Line"
msgstr "首列"

#: src/global.c:933
msgid "Last Line"
msgstr "尾列"

#: src/global.c:937
msgid "Prev File"
msgstr "上個檔案"

#: src/global.c:939
msgid "Next File"
msgstr "下個檔案"

#. TRANSLATORS: The next four strings are names of keyboard keys.
#: src/global.c:949
msgid "Tab"
msgstr "定位鍵 (Tab)"

#: src/global.c:951
msgid "Enter"
msgstr "Enter 鍵"

#: src/global.c:954
msgid "Backspace"
msgstr "Backspace 鍵"

#: src/global.c:956
msgid "Delete"
msgstr "刪除鍵"

#. TRANSLATORS: The next two strings refer to deleting words.
#: src/global.c:961
msgid "Chop Left"
msgstr "裁斷左側內容"

#: src/global.c:963
msgid "Chop Right"
msgstr "裁斷右側內容"

#: src/global.c:965 src/global.c:1111
msgid "Cut Till End"
msgstr "剪下至末端"

#: src/global.c:970 src/global.c:1068
msgid "Full Justify"
msgstr "完全對齊"

#: src/global.c:975
msgid "Word Count"
msgstr "字數統計"

#: src/global.c:979
msgid "Verbatim"
msgstr "原形"

#: src/global.c:983
msgid "Indent"
msgstr "縮排"

#: src/global.c:985
msgid "Unindent"
msgstr "移除縮排"

#: src/global.c:989
msgid "Comment Lines"
msgstr "註解該列"

#: src/global.c:993
msgid "Complete"
msgstr "完成"

#: src/global.c:998
msgid "Record"
msgstr "錄製"

#: src/global.c:1000
msgid "Run Macro"
msgstr "執行巨集"

#. TRANSLATORS: This refers to deleting a line or marked region.
#: src/global.c:1004
msgid "Zap"
msgstr "Zap"

#: src/global.c:1007
msgid "Anchor"
msgstr "錨點"

#: src/global.c:1009
msgid "Up to anchor"
msgstr "前往上個錨點"

#: src/global.c:1011
msgid "Down to anchor"
msgstr "前往下個錨點"

#: src/global.c:1016 src/global.c:1060
msgid "Spell Check"
msgstr "拼字檢查"

#: src/global.c:1020 src/global.c:1064
msgid "Linter"
msgstr "Linter"

#: src/global.c:1024 src/global.c:1072
msgid "Formatter"
msgstr "程式碼格式化工具"

#: src/global.c:1034 src/global.c:1114
msgid "Suspend"
msgstr "暫停"

#: src/global.c:1042
msgid "Center"
msgstr "置中"

#: src/global.c:1046
msgid "Save"
msgstr "儲存"

#: src/global.c:1056
msgid "Pipe Text"
msgstr "將文字傳入管線"

#: src/global.c:1079
msgid "Go To Text"
msgstr "前往文字"

#: src/global.c:1084
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:1086
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:1094
msgid "Append"
msgstr "附加"

#: src/global.c:1096
msgid "Prepend"
msgstr "前置"

#: src/global.c:1099
msgid "Backup File"
msgstr "備份檔案"

#: src/global.c:1103
msgid "No Conversion"
msgstr "未轉換"

#: src/global.c:1108
msgid "Execute Command"
msgstr "執行指令"

#. TRANSLATORS: This invokes the file browser.
#: src/global.c:1123
msgid "Browse"
msgstr "瀏覽"

#: src/global.c:1131
msgid "First File"
msgstr "第一個檔案"

#: src/global.c:1133
msgid "Last File"
msgstr "最後一個檔案"

#: src/global.c:1137
msgid "Left Column"
msgstr "左欄"

#: src/global.c:1139
msgid "Right Column"
msgstr "右欄"

#: src/global.c:1141
msgid "Top Row"
msgstr "上排"

#: src/global.c:1143
msgid "Bottom Row"
msgstr "下排"

#: src/global.c:1148
msgid "Discard buffer"
msgstr "放棄緩衝區"

#. TRANSLATORS: The next two strings may be up to 37 characters each.
#: src/global.c:1153
msgid "Previous Linter message"
msgstr "上一則 Linter 訊息"

#: src/global.c:1155
msgid "Next Linter message"
msgstr "下一則 Linter 訊息"

#. TRANSLATORS: The next thirteen strings are toggle descriptions;
#. * they are best kept shorter than 40 characters, but may be longer.
#: src/global.c:1518
msgid "Hidden interface"
msgstr "隱藏介面"

#: src/global.c:1520
msgid "Help mode"
msgstr "說明模式"

#: src/global.c:1522
msgid "Constant cursor position display"
msgstr "持續顯示游標位置"

#: src/global.c:1524
msgid "Soft wrapping of overlong lines"
msgstr "虛擬換過長列"

#: src/global.c:1526
msgid "Line numbering"
msgstr "標示列碼"

#: src/global.c:1528
msgid "Whitespace display"
msgstr "顯示空格"

#: src/global.c:1530
msgid "Color syntax highlighting"
msgstr "語法色彩標示"

#: src/global.c:1532
msgid "Smart home key"
msgstr "智慧型 HOME 按鍵"

#: src/global.c:1534
msgid "Auto indent"
msgstr "自動縮排"

#: src/global.c:1536
msgid "Cut to end"
msgstr "剪至列尾"

#: src/global.c:1538
msgid "Hard wrapping of overlong lines"
msgstr "實際換過長列"

#: src/global.c:1540
msgid "Conversion of typed tabs to spaces"
msgstr "已將輸入的 Tab 轉換成空白"

#: src/global.c:1542
msgid "Mouse support"
msgstr "滑鼠支援"

#: src/help.c:54
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press Enter.  If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search prompt.  Hitting Enter without entering any text will perform the previous search.  "
msgstr ""
"搜尋指令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下 Enter 鍵。如果有符合您所輸入的文字，畫面就會更新到最符合搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在搜尋提示後方的括號中。不輸入任何文字而直接按下 Enter 鍵則會執行前次搜尋。"

#: src/help.c:63
msgid ""
"If you have selected text with the mark and then search to replace, only matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已經用標記選取了一段文字並進行搜尋取代，就只有在選擇文字中符合者才會被替換。\n"
"\n"
" 以下的功能鍵可用於搜尋模式：\n"
"\n"

#: src/help.c:69
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are fewer lines of text than the number you entered, you will be brought to the last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"「跳列」輔助說明\n"
"\n"
" 首先輸入想前往的列碼，並按下 Enter 鍵。如果文件中的列數比您所輸入要少，則會跳至檔案最後一列。\n"
"\n"
" 以下的功能鍵可用於跳列模式：\n"
"\n"

#: src/help.c:78
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable multiple file buffers with the -F or --multibuffer command line flags, the Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入檔案輔助說明\n"
"\n"
" 先輸入檔案名稱，該檔案中的內容將會插入在目前緩衝區的游標所在之處。\n"
"\n"
" 如果您所編譯的 nano 支援多重檔案緩衝區，並使用 -F、--multibuffer 指令列旗標、Meta-F 開關或者 nanorc\n"
" 檔案來啟用此功能的話，所插入的檔案將會被載入到獨立的緩衝區中（可利用 Meta-< 和 > 在檔案緩衝區間切換）。"

#: src/help.c:87
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一個空緩衝區，那就不要輸入任何檔名，或是在提示文字後輸入不存在的檔名後按下 Enter 鍵。\n"
"\n"
" 以下的功能鍵可用於插入檔案模式：\n"
"\n"

#: src/help.c:93
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only the selected portion to a separate file.  To reduce the chance of overwriting the current file with just a portion of it, the current filename is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"寫入檔案輔助說明\n"
"\n"
" 請先輸入您想要以什麼檔名來儲存目前檔案，並按下 Enter 儲存檔案。\n"
"\n"
" 如果已經用標記功能選取文字，那麼您將被提示只將部份選擇內容儲存成一個檔案。為了降低目前檔案只被其中部分覆寫的機會，在此模式下，目前的檔名不會成為預設值。\n"
"\n"
" 以下的功能鍵可用於寫入檔案模式：\n"
"\n"

#: src/help.c:107
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to select a file for reading or writing.  You may use the arrow keys or Page Up/Down to browse through the files, and S or Enter to choose the selected file or enter the selected directory.  To move up one level, select the directory called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"檔案選單輔助說明\n"
"\n"
" 檔案選單是用來視覺化瀏覽目錄結構，以選取要讀出或寫入的檔案。您可以\n"
" 使用上下左右鍵或上頁/下頁來瀏覽，並用 S 或 Enter 鍵來選取所要的檔案或者 進入所選的目錄。要跳到上層時，選擇在檔案列表頂端名為「..」的目錄。\n"
"\n"
" 以下的功能鍵可用於檔案選單：\n"
"\n"

#: src/help.c:120
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press Enter.  If there is a match for the text you entered, the screen will be updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search prompt.  Hitting Enter without entering any text will perform the previous search.\n"
"\n"
msgstr ""
"搜尋指令輔助說明\n"
"\n"
" 首先輸入您想要搜尋的字串或字元，然後按下 Enter 鍵 (Enter)。如果存在著\n"
" 符合您所輸入的文字，畫面就會更新到最合乎搜尋字串的位置。\n"
"\n"
" 前次搜尋的字串將會顯示在 搜尋: 提示符號後面的括號中。\n"
" 不輸入任何文字而直接按下 Enter 鍵則會履行前次的搜尋。\n"
"\n"

#: src/help.c:129
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於瀏覽器搜尋模式：\n"
"\n"

#: src/help.c:133
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to (attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"前往目錄輔助說明\n"
"\n"
" 先輸入您想要瀏覽的目錄名稱。\n"
"\n"
" 如果未關閉 Tab 完成的功能，\n"
" 您可以利用 Tab 鍵 (嘗試) 自動完成目錄名稱。\n"
"\n"
" 以下的功能鍵可用於前往目錄模式：\n"
"\n"

#: src/help.c:146
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  When an unknown word is encountered, it is highlighted and a replacement can be edited.  It will then prompt to replace every instance of the given misspelled word in the current file, or, if you have selected text with the mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼字檢查輔助說明\n"
"\n"
" 拼字檢查程式會檢查目前檔案中所有文字的拼法。\n"
" 當遇到一個未知的字，它將被標記起來，並讓您編輯取代文字。\n"
" 對於目前檔案中每一個拼錯的字，都會顯示取代的提示；\n"
" 或者，如果已經用標記選擇了文字的話，那就只作用於選取的文字之中。\n"
"\n"
" 以下的功能鍵可用於拼字檢查模式：\n"
"\n"

#: src/help.c:161
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell into the current buffer (or into a new buffer).  If the command is preceded by '|' (the pipe symbol), the current contents of the buffer (or marked region) will be piped to the command.  "
msgstr ""
"執行指令輔助說明\n"
"\n"
" 這個模式允許您插入從 shell 執行之指令的輸出到目前的緩衝區 (或是插入到新的緩衝區)。\n"
" 若在指令之前加上「|」(pipe 管線符號)，則目前緩衝區的內容（或選取區塊）將會 pipe 到指令中。"

#: src/help.c:167
msgid ""
"If you just need another blank buffer, do not enter any command.\n"
"\n"
" You can also pick one of four tools, or cut a large piece of the buffer, or put the editor to sleep.\n"
"\n"
msgstr ""
"如您只需要另一個空白緩衝區，請不要輸入任何命令。\n"
"\n"
" 您亦可從四個工具挑選一個，或剪下較大範圍的緩衝區，或者是讓編輯器休眠\n"
"\n"

#: src/help.c:170
msgid ""
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於執行指令模式：\n"
"\n"

#: src/help.c:173
msgid ""
"=== Linter ===\n"
"\n"
" In this mode, the status bar shows an error message or warning, and the cursor is put at the corresponding position in the file.  With PageUp and PageDown you can switch to earlier and later messages.\n"
"\n"
msgstr ""
"=== Linter ===\n"
"\n"
" 這個模式中，狀態列會顯示錯誤或警告訊息，且游標將會放在檔案中的對應位置。\n"
" 使用 PageUp 和 PageDown 按鈕可以切換到較新或較舊的訊息。\n"
"\n"

#: src/help.c:178
msgid ""
" The following function keys are available in Linter mode:\n"
"\n"
msgstr ""
" 下列功能鍵可用於 Linter 模式：\n"
"\n"

#: src/help.c:185
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of the UW Pico text editor.  There are four main sections of the editor.  The top line shows the program version, the current filename being edited, and whether or not the file has been modified.  Next is the main editor window showing the file being edited.  The status line is the third line from the bottom and shows important messages.  "
msgstr ""
"nano 輔助說明\n"
"\n"
" nano 編輯器是設計來在功能性及易用性方面模仿華盛頓大學的 Pico 文字編輯器。\n"
" 它含有四個主要部分：頂列顯示程式版本、目前被編輯的檔案名稱，以及是否這檔案已經變更過。\n"
" 接著是主要編輯區，用來顯示正在編輯的檔案。狀態列位於倒數第三列，用來顯示重要的訊息。"

#: src/help.c:195
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" Shortcuts are written as follows: Control-key sequences are notated with a '^' and can be entered either by using the Ctrl key or pressing the Esc key twice.  Meta-key sequences are notated with 'M-' and can be entered using either the Alt, Cmd, or Esc key, depending on your keyboard setup.  "
msgstr ""
"底部的兩列顯示編輯器中最常用到的快捷鍵。\n"
"\n"
" 快捷鍵的定義如下：控制鍵組 (Control-key) 序列是以一個帽子符號「^」表示，\n"
" 且可藉由使用 Ctrl 鍵或按兩下 Esc 鍵輸入。\n"
" Meta-Key 序列是以「M-」符號表示，\n"
" 且可以藉由您的鍵盤設定來選擇使用 Alt、Cmd 或 Esc 鍵輸入。"

#: src/help.c:202
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from 000 to 255 will enter the character with the corresponding value.  The following keystrokes are available in the main editor window.  Alternative keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按 Esc 兩次 之後再輸入從 000 到 255 之間的三位數字，則會輸入該 ASCII 碼對應的字元。下列按鍵組合可用於主要編輯區，替代按鍵則顯示於括弧內：\n"
"\n"

#: src/help.c:234 src/help.c:306
msgid "enable/disable"
msgstr "啟用/停用"

#: src/help.c:579 src/nano.c:1631
msgid "^W = Ctrl+W    M-W = Alt+W"
msgstr "^W = Ctrl+W    M-W = Alt+W"

#: src/history.c:237
#, c-format
msgid ""
"Unable to create directory %s: %s\n"
"It is required for saving/loading search history or cursor positions.\n"
msgstr ""
"無法建立 %s 目錄：%s\n"
"若要儲存/載入搜尋記錄或游標位置，則必須建立此目錄。\n"

#: src/history.c:244
#, c-format
msgid ""
"Path %s is not a directory and needs to be.\n"
"Nano will be unable to load or save search history or cursor positions.\n"
msgstr ""
"路徑 %s 不是但必須是個目錄。\n"
"Nano 將無法載入或儲存搜尋記錄或游標位置\n"

#: src/history.c:340 src/history.c:441
#, c-format
msgid "Cannot limit permissions on %s: %s"
msgstr "無法限縮 %s 的權限：%s"

#: src/nano.c:201
msgid "Key is invalid in view mode"
msgstr "在檢視模式中，此按鍵無效。"

#: src/nano.c:208
msgid "This function is disabled in restricted mode"
msgstr "這功能已在受限模式中停用"

#: src/nano.c:223
msgid "To suspend, type ^T^Z"
msgstr "若要暫停，請敲 ^T^Z"

#: src/nano.c:312
msgid "No file name"
msgstr "沒有檔案名稱"

#: src/nano.c:314
msgid "Save modified buffer? "
msgstr "儲存修改過的緩衝區？"

#: src/nano.c:339
#, c-format
msgid ""
"\n"
"Too many .save files\n"
msgstr ""
"\n"
"過多 .save 檔案\n"

#: src/nano.c:341
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"緩衝區已寫入 %s\n"

#: src/nano.c:501
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE[,COLUMN]] FILE]...\n"
"\n"
msgstr ""
"用法: nano [選項] [[+列碼[,欄碼]] 檔名]…\n"
"\n"

#. TRANSLATORS: The next two strings are part of the --help output.
#. * It's best to keep its lines within 80 characters.
#: src/nano.c:505
#, c-format
msgid ""
"To place the cursor on a specific line of a file, put the line number with\n"
"a '+' before the filename.  The column number can be added after a comma.\n"
msgstr ""
"若要將游標放在檔案的指定行中，請在檔案名稱前加上「+列碼」。\n"
"可在「+列碼」加個逗號後加上要前往的欄碼。\n"

#: src/nano.c:507
#, c-format
msgid ""
"When a filename is '-', nano reads data from standard input.\n"
"\n"
msgstr ""
"當檔案名稱為「-」，Nano 將從標準輸入讀取資料\n"
"\n"

#. TRANSLATORS: The next three are column headers of the --help output.
#: src/nano.c:509
msgid "Option"
msgstr "選項"

#: src/nano.c:509
msgid "Long option"
msgstr "長選項"

#: src/nano.c:509
msgid "Meaning"
msgstr "意義"

#. TRANSLATORS: The next forty or so strings are option descriptions
#. * for the --help output.  Try to keep them at most 40 characters.
#: src/nano.c:512
msgid "Enable smart home key"
msgstr "開啟智慧型 HOME 按鍵"

#: src/nano.c:514
msgid "Save backups of existing files"
msgstr "儲存既有檔案的備份"

#: src/nano.c:515
msgid "-C <dir>"
msgstr "-C <目錄>"

#: src/nano.c:515
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目錄>"

#: src/nano.c:516
msgid "Directory for saving unique backup files"
msgstr "用來儲存唯一備份檔案的目錄"

#: src/nano.c:519
msgid "Use bold instead of reverse video text"
msgstr "使用粗體而非反白顯示文字"

#: src/nano.c:521
msgid "Convert typed tabs to spaces"
msgstr "將輸入的 Tab 符號轉換成空白字元"

#: src/nano.c:526
msgid "Read a file into a new buffer by default"
msgstr "預設將檔案讀取至新緩衝區"

#: src/nano.c:529
msgid "Use (vim-style) lock files"
msgstr "使用（vim 形式的）鎖定檔案"

#: src/nano.c:534
msgid "Save & reload old search/replace strings"
msgstr "儲存並重新載入先前的搜尋及取代字串"

#: src/nano.c:537
msgid "Don't look at nanorc files"
msgstr "請勿讀取 nanorc 檔案"

#: src/nano.c:540
msgid "-J <number>"
msgstr "-J <數字>"

#: src/nano.c:540
msgid "--guidestripe=<number>"
msgstr "--guidestripe=<數字>"

#: src/nano.c:541
msgid "Show a guiding bar at this column"
msgstr "在此欄顯示指引欄"

#: src/nano.c:544
msgid "Fix numeric keypad key confusion problem"
msgstr "修正數字按鍵區混淆的問題"

#: src/nano.c:547
msgid "Don't add an automatic newline"
msgstr "不加上自動換列"

#: src/nano.c:551
msgid "Trim tail spaces when hard-wrapping"
msgstr "當使用實際折行時裁掉尾端空白"

#: src/nano.c:555
msgid "Don't convert files from DOS/Mac format"
msgstr "不要從 DOS/Mac 格式轉檔"

#: src/nano.c:557
msgid "Leading whitespace means new paragraph"
msgstr "前置空白意指新段落"

#: src/nano.c:562
msgid "Save & restore position of the cursor"
msgstr "儲存並恢復游標位置"

#: src/nano.c:565
msgid "-Q <regex>"
msgstr "-Q <正規表示式>"

#: src/nano.c:565
msgid "--quotestr=<regex>"
msgstr "--quotestr=<正規表示式>"

#. TRANSLATORS: This refers to email quoting,
#. * like the > in: > quoted text.
#: src/nano.c:568
msgid "Regular expression to match quoting"
msgstr "括號中用來尋找符合文字的正規表示式"

#: src/nano.c:571
msgid "Restrict access to the filesystem"
msgstr "限制存取檔案系統"

#: src/nano.c:573
msgid "Display overlong lines on multiple rows"
msgstr "分行顯示過長的列"

#: src/nano.c:574
msgid "-T <number>"
msgstr "-T <數字>"

#: src/nano.c:574
msgid "--tabsize=<number>"
msgstr "--tabsize=<數字>"

#: src/nano.c:575
msgid "Make a tab this number of columns wide"
msgstr "將 Tab 所佔寬度設為指定數目行"

#: src/nano.c:577
msgid "Wipe status bar upon next keystroke"
msgstr "按下下個按鍵時清空狀態列"

#: src/nano.c:578
msgid "Print version information and exit"
msgstr "顯示版本資訊並離開"

#: src/nano.c:581
msgid "Detect word boundaries more accurately"
msgstr "使偵測單字邊界更準確"

#: src/nano.c:582
msgid "-X <string>"
msgstr "-X <字串>"

#: src/nano.c:582
msgid "--wordchars=<string>"
msgstr "--wordchars=<字串>"

#: src/nano.c:583
msgid "Which other characters are word parts"
msgstr "哪些其他字元是單字的一部份"

#: src/nano.c:587
msgid "-Y <name>"
msgstr "-Y <名稱>"

#: src/nano.c:587
msgid "--syntax=<name>"
msgstr "--syntax=<名稱>"

#: src/nano.c:588
msgid "Syntax definition to use for coloring"
msgstr "用於上色的語法定義"

#: src/nano.c:591
msgid "Let Bsp and Del erase a marked region"
msgstr "使用 Bsp 和 Del 清除選取區塊"

#: src/nano.c:592
msgid "When soft-wrapping, do it at whitespace"
msgstr "當使用軟換行，請在空白處進行請在空白字元所在處進行虛擬換行"

#: src/nano.c:595
msgid "Automatically hard-wrap overlong lines"
msgstr "自動實際折過長列"

#: src/nano.c:597
msgid "Constantly show cursor position"
msgstr "持續顯示游標位置"

#: src/nano.c:599
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 Backspace 和 Delete 鍵的混淆問題"

#: src/nano.c:601
msgid "Keep the line below the title bar empty"
msgstr "保留標題列下一列的空白"

#: src/nano.c:604
msgid "-f <file>"
msgstr "-f <檔案>"

#: src/nano.c:604
msgid "--rcfile=<file>"
msgstr "--rcfile=<檔案>"

#: src/nano.c:605
msgid "Use only this file for configuring nano"
msgstr "只在設定 nano 時使用此檔案"

#: src/nano.c:608
msgid "Show cursor in file browser & help text"
msgstr "在檔案瀏覽器和輔助說明中顯示游標"

#: src/nano.c:610
msgid "Show this help text and exit"
msgstr "顯示這份說明文字並退出"

#: src/nano.c:612
msgid "Automatically indent new lines"
msgstr "自動縮排新列"

#: src/nano.c:613
msgid "Scroll per half-screen, not per line"
msgstr "一次捲動半個螢幕而非一列"

#: src/nano.c:614
msgid "Cut from cursor to end of line"
msgstr "從游標剪下至列尾"

#: src/nano.c:617
msgid "Show line numbers in front of the text"
msgstr "在文字前顯示列碼"

#: src/nano.c:620
msgid "Enable the use of the mouse"
msgstr "開啟滑鼠功能"

#: src/nano.c:623
msgid "Do not read the file (only write it)"
msgstr "請勿讀取此檔案（僅寫入檔案）"

#: src/nano.c:626
msgid "-o <dir>"
msgstr "-o <目錄>"

#: src/nano.c:626
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目錄>"

#: src/nano.c:627
msgid "Set operating directory"
msgstr "設定操作目錄"

#: src/nano.c:629
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按鍵"

#: src/nano.c:631
msgid "Show a position+portion indicator"
msgstr "顯示位置+部分指示器"

#: src/nano.c:634
msgid "-r <number>"
msgstr "-r <數字>"

#: src/nano.c:634
msgid "--fill=<number>"
msgstr "--fill=<數字>"

#: src/nano.c:635
msgid "Set width for hard-wrap and justify"
msgstr "設定實際折行的寬度並對齊"

#: src/nano.c:639
msgid "-s <program>"
msgstr "-s <程式>"

#: src/nano.c:639
msgid "--speller=<program>"
msgstr "--speller=<程式>"

#: src/nano.c:640
msgid "Use this alternative spell checker"
msgstr "使用此備用拼字檢查程式"

#: src/nano.c:642
msgid "Save changes on exit, don't prompt"
msgstr "結束時儲存變更而不提示"

#: src/nano.c:644
msgid "Save a file by default in Unix format"
msgstr "預設以 Unix 格式儲存檔案"

#: src/nano.c:646
msgid "View mode (read-only)"
msgstr "檢視模式（唯讀）"

#: src/nano.c:648
msgid "Don't hard-wrap long lines [default]"
msgstr "不實際折過長列 [預設]"

#: src/nano.c:650
msgid "Don't show the two help lines"
msgstr "請勿顯示兩說明列"

#: src/nano.c:652
msgid "Make Ctrl+Right stop at word ends"
msgstr "讓 Ctrl + 方向右鍵 停在單詞尾端"

#: src/nano.c:655
msgid "Also try magic to determine syntax"
msgstr "也嘗試使用 magic 判斷語法"

#: src/nano.c:658
msgid "Show some states on the title bar"
msgstr "在標題列顯示些狀態"

#: src/nano.c:659
msgid "Show a feedback bar at the bottom"
msgstr "在底部顯示回饋列"

#: src/nano.c:660
msgid "Hide all bars, use whole terminal"
msgstr "隱藏所有資訊列，完全使用終端空間"

#: src/nano.c:671
#, c-format
msgid " GNU nano, version %s\n"
msgstr " GNU nano，版本 %s\n"

#. TRANSLATORS: The %s is the year of the latest release.
#: src/nano.c:675
#, c-format
msgid " (C) %s the Free Software Foundation and various contributors\n"
msgstr " (C) %s 自由軟體基金會及數名貢獻者\n"

#: src/nano.c:677
#, c-format
msgid " Compiled options:"
msgstr " 編譯選項:"

#: src/nano.c:838
msgid "Could not reconnect stdin to keyboard\n"
msgstr "無法將 stdin 重新連結至鍵盤\n"

#: src/nano.c:856
#, c-format
msgid "Reading data from keyboard; type ^D or ^D^D to finish.\n"
msgstr "正在從鍵盤讀取資料；輸入 ^D 或 ^D^D 結束。\n"

#: src/nano.c:866
#, c-format
msgid "Failed to open stdin: %s"
msgstr "無法開啟標準輸入：%s"

#: src/nano.c:944
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"

#: src/nano.c:951
#, c-format
msgid "Sorry! Nano crashed!  Code: %d.  Please report a bug.\n"
msgstr "抱歉，Nano 當掉了！錯誤代碼：%d。請回報此臭蟲。\n"

#: src/nano.c:967
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "請使用「fg」回到 nano。\n"

#: src/nano.c:1090
msgid "Not possible"
msgstr "不可能"

#: src/nano.c:1111
msgid "Current syntax determines Tab"
msgstr "目前的語法判定為 Tab"

#: src/nano.c:1139
msgid "enabled"
msgstr "啟用"

#: src/nano.c:1139
msgid "disabled"
msgstr "停用"

#. TRANSLATORS: This refers to a sequence of escape codes
#. * (from the keyboard) that nano does not recognize.
#: src/nano.c:1282
msgid "Unknown sequence"
msgstr "序列未知"

#: src/nano.c:1285 src/rcfile.c:810
#, c-format
msgid "Unknown function: %s"
msgstr "未知函式：%s"

#: src/nano.c:1287
msgid "Missing }"
msgstr "缺少 }"

#. TRANSLATORS: This refers to an unbound function key.
#: src/nano.c:1292
#, c-format
msgid "Unbound key: F%i"
msgstr "按鍵未綁定：F%i"

#: src/nano.c:1295
msgid "Unbound key"
msgstr "按鍵未綁定"

#: src/nano.c:1299
#, c-format
msgid "Unbindable key: M-^%c"
msgstr "按鍵未綁定：M-^%c"

#: src/nano.c:1304 src/nano.c:1307 src/nano.c:1311 src/nano.c:1314
#, c-format
msgid "Unbound key: %s%c"
msgstr "按鍵未綁定：%s%c"

#: src/nano.c:1309
msgid "Unbindable key: ^["
msgstr "無法綁定按鍵：^["

#: src/nano.c:1890 src/rcfile.c:1656
#, c-format
msgid "Guide column \"%s\" is invalid"
msgstr "指引欄「%s」無效"

#: src/nano.c:1937 src/rcfile.c:1661
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所請求的 Tab 寬度「%s」無效"

#: src/nano.c:2041 src/rcfile.c:1606
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所請求的填充長度「%s」無效"

#: src/nano.c:2096
#, c-format
msgid "Type '%s -h' for a list of available options.\n"
msgstr "輸入「%s -h」顯示可用的選項列表。\n"

#: src/nano.c:2292
#, c-format
msgid "Bad quoting regex \"%s\": %s\n"
msgstr "引號中的正規表示式「%s」無效：%s\n"

#: src/nano.c:2447
#, c-format
msgid "Invalid search modifier '%c'"
msgstr "搜尋修飾符「%c」無效"

#: src/nano.c:2458
msgid "Empty search string"
msgstr "搜尋字串為空"

#: src/nano.c:2467 src/search.c:793
msgid "Invalid line or column number"
msgstr "列碼或欄碼無效"

#: src/nano.c:2518
msgid "Standard input is not a terminal\n"
msgstr "標準輸入不是終端機\n"

#: src/nano.c:2537
msgid "Can open just one file\n"
msgstr "只能開啟一個檔案\n"

#: src/nano.c:2555
msgid "Welcome to nano.  For basic help, type Ctrl+G."
msgstr "歡迎使用 nano。請按 Ctrl+G 取得基本使用說明。"

#. TRANSLATORS: For the next three strings, specify the starting letters
#. * of the translations for "Yes"/"No"/"All".  The first letter of each of
#. * these strings MUST be a single-byte letter; others may be multi-byte.
#: src/prompt.c:638
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:639
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:640
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:666
msgid "Yes"
msgstr "是"

#: src/prompt.c:670
msgid "No"
msgstr "否"

#: src/prompt.c:675
msgid "All"
msgstr "全部"

#: src/rcfile.c:189
#, c-format
msgid "Mistakes in '%s'"
msgstr "「%s」中發現錯誤"

#: src/rcfile.c:193
msgid "Problems with history file"
msgstr "歷史記錄檔案出現問題"

#: src/rcfile.c:197
#, c-format
msgid "Error in %s on line %zu: "
msgstr "在 %s (位於第 %zu 列) 中發現錯誤："

#: src/rcfile.c:560
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "引數 '%s' 有未封閉的 \""

#: src/rcfile.c:581 src/rcfile.c:592
msgid "Regex strings must begin and end with a \" character"
msgstr "正規表示式字串必須以 \" 字元開始及結束"

#: src/rcfile.c:597
msgid "Empty regex string"
msgstr "正規表示式字串為空"

#: src/rcfile.c:622 src/search.c:45
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "正規表示式「%s」無效: %s"

#: src/rcfile.c:642
msgid "Missing syntax name"
msgstr "遺失語法名稱"

#: src/rcfile.c:650
msgid "Unpaired quote in syntax name"
msgstr "語法名稱中發現不成對引號"

#: src/rcfile.c:662
msgid "The \"none\" syntax is reserved"
msgstr "「none」語法被保留"

#: src/rcfile.c:693
msgid "The \"default\" syntax does not accept extensions"
msgstr "「default」語法不允許副檔名"

#: src/rcfile.c:711
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "語法「%s」無顏色指令"

#: src/rcfile.c:742
msgid "Missing key name"
msgstr "遺失按鍵名稱"

#: src/rcfile.c:758 src/rcfile.c:765
#, c-format
msgid "Key name %s is invalid"
msgstr "按鍵名稱 %s 無效"

#: src/rcfile.c:774
msgid "Must specify a function to bind the key to"
msgstr "必須指定按鍵所繫結的功能"

#. TRANSLATORS: Do not translate the word "all".
#: src/rcfile.c:785
msgid "Must specify a menu (or \"all\") in which to bind/unbind the key"
msgstr "必須指定一個選單（或「all」所有）以綁定 / 取消綁定按鍵"

#: src/rcfile.c:792
#, c-format
msgid "Unknown menu: %s"
msgstr "未知選單：%s"

#: src/rcfile.c:849
#, c-format
msgid "Function '%s' does not exist in menu '%s'"
msgstr "功能「%s」不存在於選單「%s」"

#: src/rcfile.c:860
#, c-format
msgid "Keystroke %s may not be rebound"
msgstr "不能綁定按鍵輸入「%s」"

#: src/rcfile.c:951 src/rcfile.c:1509
#, c-format
msgid "Command \"%s\" not understood"
msgstr "無法辨識「%s」指令"

#: src/rcfile.c:987
#, c-format
msgid "Error expanding %s: %s"
msgstr "展開 %s 時發生錯誤: %s"

#: src/rcfile.c:1051 src/rcfile.c:1062
#, c-format
msgid "Color '%s' takes no prefix"
msgstr "「%s」色彩沒有前綴"

#: src/rcfile.c:1070
#, c-format
msgid "Color \"%s\" not understood"
msgstr "未知顏色「%s」"

#: src/rcfile.c:1086 src/rcfile.c:1097
msgid "An attribute requires a subsequent comma"
msgstr "屬性需要有後接逗號"

#: src/rcfile.c:1141
msgid "Missing color name"
msgstr "缺少顏色名稱"

#: src/rcfile.c:1152 src/rcfile.c:1252
#, c-format
msgid "Missing regex string after '%s' command"
msgstr "在「%s」指令之後缺少正規表示式字串"

#: src/rcfile.c:1178
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求對應的 \"end=\""

#: src/rcfile.c:1241 src/rcfile.c:1489
#, c-format
msgid "A '%s' command requires a preceding 'syntax' command"
msgstr "「%s」指令需要前置的 'syntax' 指令"

#: src/rcfile.c:1247
#, c-format
msgid "The \"default\" syntax does not accept '%s' regexes"
msgstr "「default」語法不允許「%s」正規表示式"

#: src/rcfile.c:1294
#, c-format
msgid "Missing argument after '%s'"
msgstr "缺少「%s」之後的參數"

#: src/rcfile.c:1304
#, c-format
msgid "Argument of '%s' lacks closing \""
msgstr "引數 '%s' 缺少閉合用的 \""

#: src/rcfile.c:1352
#, c-format
msgid "No key is bound to function '%s' in menu '%s'.  Exiting.\n"
msgstr "沒有按鍵綁定到「%2$s」目錄中的「%1$s」功能。正在退出。\n"

#: src/rcfile.c:1354
msgid "If needed, use nano with the -I option to adjust your nanorc settings.\n"
msgstr "假如需要，使用 nano 的 -I 選項來調整您的 nanorc 設定。\n"

#: src/rcfile.c:1421
#, c-format
msgid "Could not find syntax \"%s\" to extend"
msgstr "未找到要展開的語法「%s」"

#: src/rcfile.c:1478
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "指令「%s」在包含的檔案中不允許"

#: src/rcfile.c:1521
msgid "Missing option"
msgstr "缺少選項"

#: src/rcfile.c:1535
#, c-format
msgid "Unknown option: %s"
msgstr "未知選項：%s"

#: src/rcfile.c:1550
#, c-format
msgid "Cannot unset option \"%s\""
msgstr "無法取消設定選項「%s」"

#: src/rcfile.c:1555
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "選項「%s」需要參數"

#: src/rcfile.c:1567
msgid "Argument is not a valid multibyte string"
msgstr "參數非有效的多位元字串"

#: src/rcfile.c:1614 src/rcfile.c:1632 src/rcfile.c:1637
msgid "Non-blank characters required"
msgstr "需要非空格字元"

#: src/rcfile.c:1616
msgid "Even number of characters required"
msgstr "需要偶數字元"

#: src/rcfile.c:1621
msgid "Two single-column characters required"
msgstr "需要兩個單欄字元"

#: src/rcfile.c:1711
msgid "Specified rcfile does not exist\n"
msgstr "找不到指定的 rcfile\n"

#: src/rcfile.c:1730
msgid "I can't find my home directory!  Wah!"
msgstr "找不到家目錄！哇！"

#. TRANSLATORS: The next four modify the search prompt.
#: src/search.c:102
msgid " [Case Sensitive]"
msgstr " [區分大小寫]"

#: src/search.c:103
msgid " [Regexp]"
msgstr " [正規表示式]"

#: src/search.c:107
msgid " (to replace) in selection"
msgstr " 在選取區塊中（替換）"

#: src/search.c:109
msgid " (to replace)"
msgstr " （替換）"

#. TRANSLATORS: This is shown when searching takes
#. * more than half a second.
#: src/search.c:234 src/search.c:307
msgid "Searching..."
msgstr "搜尋中…"

#: src/search.c:407
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到「%.*s%s」"

#. TRANSLATORS: This is a prompt.
#: src/search.c:596
msgid "Replace this instance?"
msgstr "取代這個？"

#. TRANSLATORS: This is a prompt.
#: src/search.c:710
msgid "Replace with"
msgstr "以此取代"

#: src/search.c:736
#, c-format
msgid "Replaced %zd occurrence"
msgid_plural "Replaced %zd occurrences"
msgstr[0] "已取代 %zd 處"

#. TRANSLATORS: This is a prompt.
#: src/search.c:772
msgid "Enter line number, column number"
msgstr "輸入列碼, 欄碼"

#: src/search.c:947
msgid "Not a bracket"
msgstr "非括號"

#: src/search.c:990
msgid "No matching bracket"
msgstr "無對應括號"

#: src/search.c:1005
msgid "Placed anchor"
msgstr "已放置錨點"

#: src/search.c:1007
msgid "Removed anchor"
msgstr "已移除錨點"

#: src/search.c:1024
msgid "Jumped to anchor"
msgstr "已跳至錨點"

#: src/search.c:1026
msgid "This is the only anchor"
msgstr "此為唯一錨點"

#: src/search.c:1028
msgid "There are no anchors"
msgstr "沒有錨點"

#: src/text.c:54
msgid "Mark Set"
msgstr "設定標記"

#: src/text.c:57
msgid "Mark Unset"
msgstr "取消設定標記"

#: src/text.c:381
msgid "Commenting is not supported for this file type"
msgstr "此檔案類型不支援備註功能"

#: src/text.c:391
msgid "Cannot comment past end of file"
msgstr "無法在檔案結尾新增備註"

#: src/text.c:512
msgid "Nothing to undo"
msgstr "沒有可以復原的變更"

#. TRANSLATORS: The next thirteen strings describe actions
#. * that are undone or redone.  They are all nouns, not verbs.
#: src/text.c:523 src/text.c:585 src/text.c:710 src/text.c:771
msgid "addition"
msgstr "新增"

#: src/text.c:531 src/text.c:722
msgid "line break"
msgstr "分列符號"

#: src/text.c:548 src/text.c:732
msgid "deletion"
msgstr "刪除模式"

#: src/text.c:558 src/text.c:738
msgid "line join"
msgstr "列連結"

#: src/text.c:575 src/text.c:754
msgid "replacement"
msgstr "取代模式"

#: src/text.c:595 src/text.c:775
msgid "erasure"
msgstr "擦除"

#. TRANSLATORS: Remember: these are nouns, NOT verbs.
#: src/text.c:601 src/text.c:780
msgid "cut"
msgstr "剪下"

#: src/text.c:605 src/text.c:784
msgid "paste"
msgstr "貼上"

#: src/text.c:612 src/text.c:788
msgid "insertion"
msgstr "插入"

#: src/text.c:641 src/text.c:811
msgid "indent"
msgstr "縮排"

#: src/text.c:645 src/text.c:815
msgid "unindent"
msgstr "移除縮排"

#: src/text.c:650 src/text.c:820
msgid "comment"
msgstr "註解"

#: src/text.c:654 src/text.c:824
msgid "uncomment"
msgstr "移除註解"

#: src/text.c:662
#, c-format
msgid "Undid %s"
msgstr "已復原 %s"

#: src/text.c:697
msgid "Nothing to redo"
msgstr "沒有可以重作的變更"

#: src/text.c:832
#, c-format
msgid "Redid %s"
msgstr "已重作 %s"

#. TRANSLATORS: This one goes with Undid/Redid messages.
#: src/text.c:1773 src/text.c:1990
msgid "justification"
msgstr "對齊"

#: src/text.c:1784 src/text.c:2116
msgid "Selection is empty"
msgstr "選取區域為空"

#: src/text.c:1994
msgid "Justified selection"
msgstr "已對齊選取區域"

#: src/text.c:1998
msgid "Justified file"
msgstr "已對齊檔案"

#: src/text.c:2000
msgid "Justified paragraph"
msgstr "已對齊段落"

#: src/text.c:2119
msgid "Buffer is empty"
msgstr "緩衝區空白"

#: src/text.c:2131
msgid "Invoking formatter..."
msgstr "正在呼叫格式化工具…"

#: src/text.c:2164 src/text.c:2744
#, c-format
msgid "Error invoking '%s'"
msgstr "呼叫「%s」時發生錯誤"

#: src/text.c:2168
#, c-format
msgid "Program '%s' complained"
msgstr "應用程式「%s」在抱怨"

#: src/text.c:2176
msgid "Nothing changed"
msgstr "未變更任何東西"

#. TRANSLATORS: The next two go with Undid/Redid messages.
#: src/text.c:2201
msgid "spelling correction"
msgstr "拼字修正"

#: src/text.c:2201
msgid "formatting"
msgstr "格式化中"

#: src/text.c:2219 src/text.c:2515
msgid "Finished checking spelling"
msgstr "拼字檢查完成"

#: src/text.c:2221
msgid "Buffer has been processed"
msgstr "已處理緩衝區"

#: src/text.c:2265
#, c-format
msgid "Unfindable word: %s"
msgstr "單字無法搜尋：%s"

#. TRANSLATORS: This is a prompt.
#: src/text.c:2284
msgid "Edit a replacement"
msgstr "編輯取代文字"

#. TRANSLATORS: Shown after fixing misspellings in one word.
#: src/text.c:2297
msgid "Next word..."
msgstr "下一單字…"

#: src/text.c:2350
msgid "Invoking spell checker..."
msgstr "正在呼叫拼字檢查…"

#: src/text.c:2435 src/text.c:2655
msgid "Could not get size of pipe buffer"
msgstr "無法取得管線緩衝區的大小"

#: src/text.c:2509
msgid "Error invoking \"uniq\""
msgstr "呼叫「uniq」時發生錯誤"

#: src/text.c:2511
msgid "Error invoking \"sort\""
msgstr "呼叫「sort」時發生錯誤"

#: src/text.c:2513
msgid "Error invoking \"spell\""
msgstr "呼叫「spell」時發生錯誤"

#: src/text.c:2590
msgid "No linter is defined for this type of file"
msgstr "未定義此類型檔案的 Linter"

#: src/text.c:2600
msgid "Save modified buffer before linting?"
msgstr "在 Lint 之前儲存已修改過的緩衝區？"

#: src/text.c:2617
msgid "Invoking linter..."
msgstr "正在呼叫 linter…"

#: src/text.c:2749
#, c-format
msgid "Got 0 parsable lines from command: %s"
msgstr "在指令中取得 0 個可解析的列：%s"

#: src/text.c:2787
#, c-format
msgid "This message is for unopened file %s, open it in a new buffer?"
msgstr "這個訊息關於未開啟的檔案 %s，是否在新緩衝區開啟此檔？"

#: src/text.c:2826
msgid "No messages for this file"
msgstr "沒有此檔案的訊息"

#: src/text.c:2876
msgid "At first message"
msgstr "第一則訊息"

#: src/text.c:2886
msgid "At last message"
msgstr "最近的訊息"

#: src/text.c:2931
msgid "No formatter is defined for this type of file"
msgstr "未定義此類型檔案的格式化工具"

#: src/text.c:3005
#, c-format
msgid "%s%zd %s,  %zu %s,  %zu %s"
msgstr "%s%zd %s,  %zu %s,  %zu %s"

#: src/text.c:3006
msgid "In Selection:  "
msgstr "於選取區塊："

#: src/text.c:3007
msgid "line"
msgid_plural "lines"
msgstr[0] "列"

#: src/text.c:3008
msgid "word"
msgid_plural "words"
msgstr[0] "個單字"

#: src/text.c:3009
msgid "character"
msgid_plural "characters"
msgstr[0] "字元"

#. TRANSLATORS: Shown when the next keystroke will be inserted verbatim.
#: src/text.c:3027
msgid "Verbatim Input"
msgstr "原形輸入"

#. TRANSLATORS: An invalid verbatim Unicode code was typed.
#: src/text.c:3051
msgid "Invalid code"
msgstr "代碼無效"

#. TRANSLATORS: Shown when no text is directly left of the cursor.
#: src/text.c:3130
msgid "No word fragment"
msgstr "未找到單詞片段"

#: src/text.c:3231
msgid "No further matches"
msgstr "未找到其他符合項目"

#. TRANSLATORS: Shown when there are zero possible completions.
#: src/text.c:3234
msgid "No matches"
msgstr "未找到符合項目"

#: src/utils.c:296 src/utils.c:307
msgid "Nano is out of memory!\n"
msgstr "Nano 已用盡記憶體！\n"

#: src/winio.c:106
msgid "Recording a macro..."
msgstr "正在錄製巨集…"

#: src/winio.c:109
msgid "Stopped recording"
msgstr "停止錄製"

#: src/winio.c:121
msgid "Cannot run macro while recording"
msgstr "無法在錄製時執行巨集"

#: src/winio.c:127
msgid "Macro is empty"
msgstr "巨集為空"

#: src/winio.c:147
msgid "Too much input at once\n"
msgstr "一次輸入的內容過多\n"

#: src/winio.c:258
msgid "Too many errors from stdin\n"
msgstr "過多來自標準輸入的錯誤\n"

#. TRANSLATORS: This is shown while a six-digit hexadecimal
#. * Unicode character code (%s) is being typed in.
#: src/winio.c:1398
#, c-format
msgid "Unicode Input: %s"
msgstr "萬國碼 Unicode 輸入：%s"

#. TRANSLATORS: The next five are "labels" in the title bar.
#: src/winio.c:2020
msgid "Linting --"
msgstr "Lint 中 --"

#: src/winio.c:2026
msgid "DIR:"
msgstr "目錄："

#: src/winio.c:2047
msgid "View"
msgstr "檢視"

#: src/winio.c:2053 src/winio.c:2057
msgid "Modified"
msgstr "已變更"

#: src/winio.c:2055
msgid "Restricted"
msgstr "受限模式"

#: src/winio.c:2161
msgid "(nameless)"
msgstr "（未命名）"

#: src/winio.c:2192
#, c-format
msgid " (%zu line)"
msgid_plural " (%zu lines)"
msgstr[0] " (%zu 列)"

#, c-format
msgid " (%zu line, %s)"
msgid_plural " (%zu lines, %s)"
msgstr[0] " (%zu 列, %s)"

#: src/winio.c:3489
#, c-format
msgid "line %*zd/%zd (%2d%%), col %2zu/%2zu (%3d%%), char %*zu/%zu (%2d%%)"
msgstr "第 %*zd/%zd 橫列 (%2d%%)，第 %2zu/%2zu 直行 (%3d%%)，第 %*zu/%zu 個字元 (%2d%%)"

#: src/winio.c:3643
msgid "The nano text editor"
msgstr "nano 文字編輯器"

#: src/winio.c:3644
msgid "version"
msgstr "版本"

#: src/winio.c:3645
msgid "Brought to you by:"
msgstr "來自於："

#: src/winio.c:3646
msgid "Special thanks to:"
msgstr "特別感謝："

#: src/winio.c:3647
msgid "The Free Software Foundation"
msgstr "自由軟體基金會"

#: src/winio.c:3648
msgid "the many translators and the TP"
msgstr "許多的翻譯者與 TP"

#: src/winio.c:3649
msgid "For ncurses:"
msgstr "ncurses 部分："

#: src/winio.c:3650
msgid "and anyone else we forgot..."
msgstr "以及其他我們不記得的人…"

#: src/winio.c:3651
msgid "Thank you for using nano!"
msgstr "謝謝您使用 nano﹗"

#: lib/getopt.c:278
#, c-format
msgid "%s: option '%s%s' is ambiguous\n"
msgstr "%s：「%s%s」選項不明確\n"

#: lib/getopt.c:284
#, c-format
msgid "%s: option '%s%s' is ambiguous; possibilities:"
msgstr "%s：「%s%s」選項不明確；可能為："

#: lib/getopt.c:319
#, c-format
msgid "%s: unrecognized option '%s%s'\n"
msgstr "%s：「%s%s」選項無法識別\n"

#: lib/getopt.c:345
#, c-format
msgid "%s: option '%s%s' doesn't allow an argument\n"
msgstr ""
"%s：「%s%s」選項不允許參數\n"
"\n"

#: lib/getopt.c:360
#, c-format
msgid "%s: option '%s%s' requires an argument\n"
msgstr "%s：「%s%s」選項需要參數\n"

#: lib/getopt.c:621
#, c-format
msgid "%s: invalid option -- '%c'\n"
msgstr "%s：選項無效 -- '%c'\n"

#: lib/getopt.c:636 lib/getopt.c:682
#, c-format
msgid "%s: option requires an argument -- '%c'\n"
msgstr "%s：選項需要參數 -- '%c'\n"

#: lib/regcomp.c:122
msgid "Success"
msgstr "成功"

#: lib/regcomp.c:125
msgid "No match"
msgstr "無符合項目"

#: lib/regcomp.c:128
msgid "Invalid regular expression"
msgstr "正規表示式無效"

#: lib/regcomp.c:131
msgid "Invalid collation character"
msgstr "定序字元無效"

#: lib/regcomp.c:134
msgid "Invalid character class name"
msgstr "字元類別名稱無效"

#: lib/regcomp.c:137
msgid "Trailing backslash"
msgstr "結尾出現斜線"

#: lib/regcomp.c:140
msgid "Invalid back reference"
msgstr "反向參考無效"

#: lib/regcomp.c:143
msgid "Unmatched [, [^, [:, [., or [="
msgstr "不對稱的 [、[^、[:、[. 或 [="

#: lib/regcomp.c:146
msgid "Unmatched ( or \\("
msgstr "不對稱的 ( 或 \\("

#: lib/regcomp.c:149
msgid "Unmatched \\{"
msgstr "不對稱的 \\{"

#: lib/regcomp.c:152
msgid "Invalid content of \\{\\}"
msgstr "\\{\\} 中內容無效"

#: lib/regcomp.c:155
msgid "Invalid range end"
msgstr "範圍結尾無效"

#: lib/regcomp.c:158
msgid "Memory exhausted"
msgstr "記憶體耗盡"

#: lib/regcomp.c:161
msgid "Invalid preceding regular expression"
msgstr "前置正規表示式無效"

#: lib/regcomp.c:164
msgid "Premature end of regular expression"
msgstr "正規表示式過早結束"

#: lib/regcomp.c:167
msgid "Regular expression too big"
msgstr "正規表示式過長"

#: lib/regcomp.c:170
msgid "Unmatched ) or \\)"
msgstr "不對稱的 ) 或 \\)"

#: lib/regcomp.c:650
msgid "No previous regular expression"
msgstr "沒有前一個正規表示式"

#~ msgid "Unbound key: Sh-M-%c"
#~ msgstr "按鍵未綁定：Sh-M-%c"

#~ msgid "Unbound key: M-%c"
#~ msgstr "按鍵未綁定：M-%c"

#~ msgid "Unbound key: ^%c"
#~ msgstr "按鍵未指定：^%c"

#~ msgid "Cannot map name \"%s\" to a function"
#~ msgstr "無法將名稱「%s」映射到某一功能"

#~ msgid "Cannot map name \"%s\" to a menu"
#~ msgstr "無法名稱「%s」映射到某一選單"

#~ msgid " (C) 2014-%s the contributors to nano\n"
#~ msgstr " (C) 2014-%s Nano 貢獻者\n"

#~ msgid "Suspension"
#~ msgstr "暫停"

#~ msgid "Enable suspension"
#~ msgstr "開啟暫停功能"

#~ msgid "Suspension is not enabled"
#~ msgstr "尚未啟用暫停功能"

#~ msgid ""
#~ "\n"
#~ "Buffer not written to %s: %s\n"
#~ msgstr ""
#~ "\n"
#~ "緩衝區未寫入至 %s：%s\n"

#~ msgid "Log & read location of cursor position"
#~ msgstr "記錄 & 讀取游標所在位置"

#~ msgid "Select the match of a search"
#~ msgstr "選取搜尋結果的符合項目"

#~ msgid "Error writing %s: %s\n"
#~ msgstr "寫入 %s 時發生錯誤: %s\n"

#~ msgid "Error reading %s: %s\n"
#~ msgstr "讀取 %s 時發生錯誤：%s\n"

#~ msgid "Help is not available"
#~ msgstr "無法使用輔助說明"

#~ msgid " Email: nano@nano-editor.org\tWeb: https://nano-editor.org/"
#~ msgstr " 電子郵件：nano@nano-editor.org\t網頁：https://nano-editor.org/"

#~ msgid "%sWords: %zu  Lines: %zd  Chars: %zu"
#~ msgstr "%s字數：%zu  列：%zd 位元組：%zu"

#~ msgid "Unbindable key: M-["
#~ msgstr "按鍵未綁定：M-["

#~ msgid "%s: %s"
#~ msgstr "%s：%s"

#~ msgid "Read %zu line (Converted from DOS and Mac format)"
#~ msgid_plural "Read %zu lines (Converted from DOS and Mac format)"
#~ msgstr[0] "已讀取 %zu 列（轉檔自 DOS 與 Mac 格式）"

#~ msgid "Failed to write backup file; continue saving? (Say N if unsure.) "
#~ msgstr "寫入備份檔案失敗；繼續儲存？(若不確定則輸入 N。) "

#~ msgid "Error writing backup file %s: %s"
#~ msgstr "寫入暫存檔案 %s 時發生錯誤：%s"

#~ msgid "Cut Text"
#~ msgstr "剪下文字"

#~ msgid "Paste Text"
#~ msgstr "貼上文字"

#~ msgid "To Spell"
#~ msgstr "拼字檢查"

#~ msgid "Cur Pos"
#~ msgstr "游標位置"

#~ msgid "Mark Text"
#~ msgstr "標記文字"

#~ msgid "Regexp"
#~ msgstr "正規表示式"

#~ msgid "Zap Text"
#~ msgstr "刪除文字"

#~ msgid "To Files"
#~ msgstr "開啟檔案瀏覽器"

#~ msgid ""
#~ "If you just need another blank buffer, do not enter any command.\n"
#~ "\n"
#~ msgstr ""
#~ "若您只是需要另一個空白緩衝區，請勿輸入任何指令。\n"
#~ "\n"

#~ msgid ""
#~ "\n"
#~ "Buffer not written: %s\n"
#~ msgstr ""
#~ "\n"
#~ "緩衝區未寫入：%s\n"

#~ msgid "-T <#cols>"
#~ msgstr "-T <#行>"

#~ msgid "--tabsize=<#cols>"
#~ msgstr "--tabsize=<#行>"

#~ msgid "Set width of a tab to #cols columns"
#~ msgstr "設定 Tab 寬度為 #行"

#~ msgid "-r <#cols>"
#~ msgstr "-r <#欄數>"

#~ msgid "--fill=<#cols>"
#~ msgstr "--fill=<#欄數>"

#~ msgid "Option %s is ignored; it is the default\n"
#~ msgstr "已忽略 %s 選項；該選項為預設值\n"

#~ msgid "A background color cannot be bright"
#~ msgstr "背景顏色不能太亮"

#~ msgid "Enable soft line wrapping"
#~ msgstr "開啟虛擬折行功能"

#~ msgid "Creating misspelled word list, please wait..."
#~ msgstr "正在建立錯字列表，請稍候…"

#~ msgid "Error reading lock file %s: Not enough data read"
#~ msgstr "讀取鎖定檔 %s 時發生錯誤：未讀取足夠的資料"

#~ msgid "Restricted mode"
#~ msgstr "受限模式"

#~ msgid "Do quick statusbar blanking"
#~ msgstr "將狀態列快速清空"

#~ msgid "Key name is too short"
#~ msgstr "按鍵名稱過短"

#~ msgid "Key name must begin with \"^\", \"M\", or \"F\""
#~ msgstr "按鍵名稱必須以 \"^\", \"M\", 或 \"F\" 開頭"

#~ msgid ""
#~ "\n"
#~ "Press Enter to continue\n"
#~ msgstr ""
#~ "\n"
#~ "按下 Enter 鍵繼續\n"

#~ msgid "Further warnings were suppressed"
#~ msgstr "已隱藏更多錯誤"

#~ msgid "Only an 'include' syntax can be extended"
#~ msgstr "只能展開「include」語法"

#~ msgid "\"%s\" is not a normal file"
#~ msgstr "「%s」非正常檔案"

#~ msgid "Reading File"
#~ msgstr "正在讀取檔案"

#~ msgid "Option\t\tGNU long option\t\tMeaning\n"
#~ msgstr "選項\t\tGNU 長選項\t\t功能\n"

#~ msgid "Spell checking failed: %s"
#~ msgstr "拼字檢查失敗：%s"

#~ msgid "Spell checking failed: %s: %s"
#~ msgstr "拼字檢查失敗：%s: %s"

#~ msgid "Jumpy scrolling (per half-screen)"
#~ msgstr "跳躍式捲動（每次移動半個螢幕）"

#~ msgid "Ensure that text ends with a newline"
#~ msgstr "確保文字以換行字元結尾"

#~ msgid "Save modified buffer?  (Answering \"No\" will DISCARD changes.) "
#~ msgstr "是否儲存修改過的緩衝區？（回答「No」將失去所有變更。） "

#~ msgid "Nothing in undo buffer!"
#~ msgstr "復原緩衝區中沒有任何東西！"

#~ msgid "Uncut Text"
#~ msgstr "還原剪下文字"

#~ msgid "Unjustify"
#~ msgstr "還原對齊"

#~ msgid "Uncut from the cutbuffer into the current line"
#~ msgstr "從剪貼簿還原至目前這列"

#~ msgid "Smooth scrolling"
#~ msgstr "平滑式捲動畫面"

#~ msgid "Don't add newlines to the ends of files"
#~ msgstr "不要將換列加到檔案末端"

#~ msgid "Use one more line for editing"
#~ msgstr "編輯時多使用一列"

#~ msgid "Set hard-wrapping point at column #cols"
#~ msgstr "設定硬換列點為 #行數"

#~ msgid "text add"
#~ msgstr "文字加入"

#~ msgid "text delete"
#~ msgstr "文字刪除"

#~ msgid "text replace"
#~ msgstr "文字置換"

#~ msgid "text cut"
#~ msgstr "文字剪下"

#~ msgid "text uncut"
#~ msgstr "文字取消剪下"

#~ msgid "Bad quote string %s: %s"
#~ msgstr "不良引用字串 %s: %s"

#~ msgid "Can now UnJustify!"
#~ msgstr "現在可以還原對齊！"

#~ msgid "Key invalid in non-multibuffer mode"
#~ msgstr "非多重緩衝區模式中此按鍵無效"

#~ msgid "PrevHstory"
#~ msgstr "上一筆記錄"

#~ msgid "NextHstory"
#~ msgstr "下一筆記錄"

#~ msgid "No more errors in unopened files, cancelling"
#~ msgstr "在未開啟的檔案中沒有其他錯誤，取消中"

#~ msgid "Switched to %s"
#~ msgstr "切換至 %s"

#~ msgid "WhereIs Next"
#~ msgstr "下一個位置"

#~ msgid "Invoke formatter, if available"
#~ msgstr "嘗試呼叫程式碼格式化工具"

#~ msgid "Indent Text"
#~ msgstr "縮排文字"

#~ msgid "Unindent Text"
#~ msgstr "取消縮排文字"

#~ msgid "Use of one more line for editing"
#~ msgstr "編輯時多使用一列"

#~ msgid "Backup files"
#~ msgstr "備份檔案"

#~ msgid "Reading file into separate buffer"
#~ msgstr "讀取資料至獨立的緩衝區"

#~ msgid "No conversion from DOS/Mac format"
#~ msgstr "不從 DOS/Mac 格式轉檔"

#~ msgid "Fatal error: no keys mapped for function \"%s\".  Exiting.\n"
#~ msgstr "嚴重錯誤：沒有按鍵映射至功能「%s」。正在退出。\n"

#~ msgid "Finished"
#~ msgstr "完成"

#~ msgid "Invoking formatter, please wait"
#~ msgstr "調用格式化工具，請稍候"

#~ msgid "Quoting string"
#~ msgstr "引用代表字串"

#~ msgid "Reading from stdin, ^C to abort\n"
#~ msgstr "讀取自標準輸入，^C 以放棄\n"

#~ msgid "Read %lu line (Converted from DOS and Mac format - Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Converted from DOS and Mac format - Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 與 Mac 格式 - 警告：沒有寫入權限)"

#~ msgid "Read %lu line (Converted from Mac format - Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Converted from Mac format - Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 Mac 格式 - 警告：沒有寫入權限)"

#~ msgid "Read %lu line (Converted from DOS format - Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Converted from DOS format - Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (轉檔自 DOS 格式 - 警告：沒有寫入權限)"

#~ msgid "Read %lu line ( Warning: No write permission)"
#~ msgid_plural "Read %lu lines (Warning: No write permission)"
#~ msgstr[0] "已讀取 %lu 列 (警告：沒有寫入權限)"

#~ msgid "Cannot prepend or append to a symlink with --nofollow set"
#~ msgstr "--nofollow 設定下，無法前引或附加至符號連結檔"

#~ msgid ""
#~ "Detected a legacy nano history file (%s) which I tried to move\n"
#~ "to the preferred location (%s) but encountered an error: %s"
#~ msgstr ""
#~ "偵測到舊的 nano 歷史檔案 (%s)，我已嘗試將它移動\n"
#~ "到偏好的位置 (%s) 但是遇到了錯誤：%s"

#~ msgid ""
#~ "Detected a legacy nano history file (%s) which I moved\n"
#~ "to the preferred location (%s)\n"
#~ "(see the nano FAQ about this change)"
#~ msgstr ""
#~ "偵測到舊的 nano 歷史檔案 (%s)，我已將它移動\n"
#~ "到偏好的位置 (%s)\n"
#~ "(參看關於這個變更的 nano FAQ)"

#~ msgid "Insert File"
#~ msgstr "插入檔案"

#~ msgid "Exit from nano"
#~ msgstr "離開 nano"

#~ msgid "Go to previous screen"
#~ msgstr "跳至前一畫面"

#~ msgid "Find Other Bracket"
#~ msgstr "尋找其他括號"

#~ msgid "Long line wrapping"
#~ msgstr "長列轉換"

#~ msgid "Multiple file buffers"
#~ msgstr "多重檔案緩衝區"

#~ msgid "Soft line wrapping"
#~ msgstr "長列換列"

#~ msgid "Window size is too small for nano...\n"
#~ msgstr "視窗尺寸對 nano 來說太小了…\n"

#~ msgid "+LINE,COLUMN"
#~ msgstr "+列數,行數"

#~ msgid "Start at line LINE, column COLUMN"
#~ msgstr "從所指列數與行數開始"

#~ msgid "Enable multiple file buffers"
#~ msgstr "開啟多重檔案緩衝區功能"

#~ msgid "-Y <str>"
#~ msgstr "-Y <字串>"

#~ msgid "Don't follow symbolic links, overwrite"
#~ msgstr "不要依照符號連結，而是覆寫"

#~ msgid "Silently ignore startup issues like rc file errors"
#~ msgstr "默默地忽略像是 rc 檔案錯誤之類的啟動問題"

#~ msgid "Allow generic undo [EXPERIMENTAL]"
#~ msgstr "允許一般的復原 [實驗性質]"

#~ msgid "(ignored, for Pico compatibility)"
#~ msgstr "(忽略，為了與 Pico 相容)"

#~ msgid "Sorry, support for this function has been disabled"
#~ msgstr "抱歉，已經關閉此功能的支援"

#~ msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
#~ msgstr "儲存更動過的緩衝區嗎 (回答 \"No\" 會撤銷修改)？"

#~ msgid "Unknown Command"
#~ msgstr "不明的命令"

#~ msgid "XON ignored, mumble mumble"
#~ msgstr "忽略 XON，嗯嗯。"

#~ msgid "XOFF ignored, mumble mumble"
#~ msgstr "忽略 XOFF，嗯嗯。"

#~ msgid "Cannot add a magic string regex without a syntax command"
#~ msgstr "無法增加魔法正規表示式而沒有語法命令"

#~ msgid "Missing magic string name"
#~ msgstr "缺少魔法字串名稱"

#~ msgid "Must specify menu to bind key to (or \"all\")"
#~ msgstr "必須指定按鍵所繫結的選單 (或是 \"all\")"

#~ msgid ""
#~ "Color \"%s\" not understood.\n"
#~ "Valid colors are \"green\", \"red\", \"blue\",\n"
#~ "\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
#~ "\"black\", with the optional prefix \"bright\"\n"
#~ "for foreground colors."
#~ msgstr ""
#~ "顏色 \"%s\" 無法辨識。\n"
#~ "有效的顏色是 \"green\"(綠)、\"red\"(紅)、\"blue\"(藍)、\n"
#~ "\"white\"(白)、\"yellow\"(黃)、\"cyan\"(青)、\"magenta\"(瑰) 和 \n"
#~ "\"black\"(黑)，加上選擇性的前置字 \"bright\"(明亮) \n"
#~ "可用於前景色。"

#~ msgid "Cannot add a color command without a syntax command"
#~ msgstr "無法增加顏色命令而沒有語法命令"

#~ msgid "Cannot add a header regex without a syntax command"
#~ msgstr "無法增加標頭正規表示式而沒有語法命令"

#~ msgid ""
#~ "\n"
#~ "Press Enter to continue starting nano.\n"
#~ msgstr ""
#~ "\n"
#~ "按下輸入鍵以繼續啟動 nano。\n"

#~ msgid "Internal error: can't match line %d.  Please save your work"
#~ msgstr "內部錯誤：無法匹配第 %d 列。 請儲存您的工作"

#~ msgid "line wrap"
#~ msgstr "長列換列"

#~ msgid "Internal error: unknown type.  Please save your work"
#~ msgstr "內部錯誤：不明型態。 請儲存您的工作"

#~ msgid "Internal error: Redo setup failed.  Please save your work"
#~ msgstr "內部錯誤：重做設定失敗。 請儲存您的工作"

#~ msgid "Could not pipe"
#~ msgstr "管線功能無效"

#~ msgid "Internal error: can't setup uncut.  Please save your work."
#~ msgstr "內部錯誤：無法設定取消剪下。 請儲存您的工作。"

#~ msgid "Internal error: unknown type.  Please save your work."
#~ msgstr "內部錯誤：不明型態。 請儲存您的工作。"

#~ msgid "File:"
#~ msgstr "檔案:"

#~ msgid "Warning: Modifying a file which is not locked, check directory permission?"
#~ msgstr "警告：正在變更一個未鎖定的檔案，要檢查一下目錄權限嗎？"